Proton RG02 Flash File Firmware SC6531E

Download Proton RG02 Firmware Flash File

You want flashing your Proton RG02 keypad phone and looking for the desired flash file? Then this article may be helpful for you. So read the whole post carefully, because I have shared the download link of all the equipment including flash file, USB driver, flash tool to flash the Proton RG02 mobile phone. Also discussed the flushing procedure step by step.


The Proton RG02 Stock Firmware ROM is using to solve Full Flash, Dead Recovery, Pin Remove of your Proton device. The flash file currently comes in a zip package and we are publishing below this firmware all details. You first check the details before download the firmware file. Because you will facing any problems for which we will not be responsible in any way.

Download Proton RG02 Firmware Flash File

File Name: Proton RG02
Processor: SC6531E
File Type: Bin
File Size: 4MB

How to Flash Your Proton RG02

Before flashing the Stock ROM on your Proton RG02, you should download the firmware stock rom. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. Take a complete backup of your device after start flashing process.

Download Latest SCR USB Driver

Download SC6531E Flash Tool Crack

Step to Flash Your Proton RG02

Following below steps to flash your Proton RG02 mobile phone using CM2/Miracle or other’s flash tools. Also We have shared a short tutorial of Miracle Thunder Tool.

  • Download and extract the flash file on your computer.
  • Install the USB Driver on your computer.
  • Lunch tool on your PC screen
  • Select SPD
  • Choose SP 6631E
  • Add file on the tool
  • Click the Start button.
  • Connect your device to computer via USB cable
  • Insert battery in mobile.
  • That’s ok! Now start your flash process.

That’s it, guys. We hope that you’ve installed the firmware on your device successfully.