Symphony Z12 Firmware Flash File SP9863A Stock ROM

You want Symphony Z12 Firmware Flash File for your android smartphone and looking for the desired Stock ROM? Then this article may be helpful for you. So read the whole post carefully, because I have shared the download link of all the equipment including flash file, USB driver, flash tool to flash the Symphony Z12 android phone. Also discussed the flushing procedure step by step.


symphony z12 stock rom firmware


Solve problems using Symphony Z12 Firmware:

The Symphony Z12 Stock Firmware ROM is using to solve Full Flash, Dead Recovery, Pin Remove of your Symphony device. The flash file currently comes in a zip package and we are publishing below this firmware all details. You first check the details before download the firmware file. Because you will facing any problems for which we will not be responsible in any way.


Symphony Z12 Firmware Flash File:

Here, We share the Symphony Z12 firmware after reading and saving into PC and the firmware files from the new mobile phone. The most interesting thing is that we test our firmware files ourselves before delivering. We also scan the firmware files with high quality anti-virus, so our firmware files are always free from harmful viruses. So we can emphasize that you can use our firmware without any hesitation.


Download Symphony Z12 Firmware Flash File

Here we are providing 100% tested firmware flash file for Symphony android smartphone. So, you can download and install the Stock ROM without any manufacturing issue.


Software details:

File Name: Symphony Z12
Processor: SP6863A
OS Ver: Android 9.0
Supported Tool: SPD Flash Tool
File Type: Pac
File Size: 1.2GB


Download Now


Need Also: Symphony G10 Firmware Flash File


How to Flash

Before flashing the Stock ROM on your Symphony Z12, you should download the firmware stock rom. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. Take a complete backup of your device after start flashing process.



Step to Flash Symphony Z12

Following below steps to flash your Symphony Z12 smartphone using CM2/Miracle or other’s flash tools. Also We have shared a short tutorial of SPD Flash Tool.

1: First download SPD Flash tools from above link and extract it inside a Folder.

2: And then download Firmware for Your phone from above link and extract it inside a folder.

3: After that install latest SPD USB Driver on your PC.

4: After that Run Flash tool.exe file from tool folder and load pac File under firmware.

5: And then click Start button

6. As soon as connect your Switched off device to PC via USB cable. Until Press and Hold Volume up or Volume down key.

7: And in the last wait for Success Done.

8: That’s it! You have successfully Flashed your Phone.


That’s it, guys. We hope that you’ve installed the firmware on your device successfully.


Leave a Comment