3000+ Bar Phone FirmwareGet Update for Click

Walton S34 Flash File (Firmware) SC6531E

If you are looking for a Walton S34 Flash File Firmware run with SC6531E processor. You come in the right place. Using this firmware, Fou can flash the firmware file to troubleshoot/flash related any issues on your device. Yes! With this guide, you can resolve problems such as Pin remove/unlock, Full flash, Dead recovery, As can be seen Automatically restart phone and more also fix any software related problems.

 

walton-s34-flash-file-firmware

 

To flash the firmware file on your Walton Olvio S34 mobile phone, We are using the Miracle Thunder as this device is powered by SCR. We have shared all the requirement files to download and Flash the firmware on your Walton device.

 

Why We Need Flash File?

The Flash Firmware or a Flash File is official software that is designed by the OEM manufacturer for a particular device. This file is required to fix any software related issue on your Walton Olvio S34. If you are facing any problem with your mobile device, your final attempt will be to re-download/install the firmware. This way, you can restore your device back to firmware. So, you can download the firmware without any issue.

 

Download Walton s34 Flash File (Firmware)

  • File Name: Walton Olvio s34
  • Chipset: SC6531E
  • File Type: Bin
  • File Size: 4MB

 

Download Walton S34 SC6531E Firmware Flash File

 

Need also:

 

 

How to Flash

Before installing the Firmware on your Walton S34, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. You are done with these, you can follow below steps to flash. But let’s take a quick look at the flash file and hardware importance and firmware details above:

 

Step to Flash Walton S34

You will following below steps to flash your Walton Olvio S34 mobile phone using CM2/Miracle or other’s flash tools. Also We have shared a short tutorial of Miracle Thunder Tool.

  1. Download and extract the flash file on your windows PC.
  2. Install the USB Driver on your PC.
  3. Lunch tool on your PC screen
  4. Select SPD
  5. Choose 6631E SP
  6. Add file on the tool
  7. Click the Start button.
  8. Connect your device to computer via USB cable
  9. Insert battery in mobile.
  10. That’s it, guys. We hope that you’ve installed the flash file on your device successfully.

That’s it, guys. We hope that you have complete installed the flash file on your firmware on your Walton S34 feature phone device successfully.  And if we don’t work with this guide. Then do it in the comments section below..

Add a Comment

Your email address will not be published. Required fields are marked *

Clicky