You want flashing your Winstar W28 keypad phone and looking for the desired flash file? Then this article may be helpful for you. So read the whole post carefully, because I have shared the download link of all the equipment including flash file, USB driver, flash tool to flash the Winstar W805 mobile phone. Also discussed the flashing procedure step by step.
The Winstar W28 Stock Firmware ROM is using to solve Full Flash, Dead Recovery, Pin Remove of your Winstar device. The Winstar W28 currently comes in a zip package and we are publishing below this software details. You first check the details before download the firmware file.
Download Winstar W28 6531E Flash File Stock ROM
Here we are providing 100% tested firmware flash file for Winstar W28 SC6531E. So, you can download and install the Stock ROM without any manufacturing issue.
How to Flash
Fist of before starting flashing process please take on a backup file of you phone. You may be carefully follow below step and very awareness of your require technical issue.
Steps to Flash Winstar W28 Flash File
Follow up below steps guide to flash your Winstar W28 mobile phone using CM2/Miracle or other’s flash tools. Also We have added below a short tutorial of Miracle Thunder Free Crack Tool.
Method – 1 : Steps to Flash of Miracle Thunder using ,bin File
1. Download and extract the W28 flash file on your PC
2. Install the USB Driver on your PC
3. Click to tool on your PC screen
4. Select SPD
5. Choose SP 6631E
6. Add file on the tool
7. Click the Start button.
8. Connect your device to computer via USB cable
9. Insert battery in mobile.
10. That’s ok! Now start your flash process.
Method – 2 : Steps to Flash of SPD Flash Tool using .pac File
(If you have a pac file, So that following the tutorial)
1: First download SPD Flash tools from above link and extract it inside a Folder.
2: And then download Firmware for Your phone from above link and extract it inside a folder.
3: After that install latest SPD USB Driver on your PC.
4: Double click to Run Flash tool.exe file from tool folder and load pac File under firmware.
5: And then click Start button
6. As soon as connect your Switched off device to PC via USB cable. Until Press and Hold Volume up or Volume down key.
6: Waiting for Success interface.
7: That’s it! You have successfully Flashed your Phone.
That’s it, guys. We hope that you’ve installed the firmware on your device successfully.