In the next window, you can see all your iDevice’s information is displayed in there. Check your device model, iOS version, IMEI, serial number and UDID before starting the bypass process. Then, click the “Start Bypass” button.
(Note: Once the bypassing process is done, all features like Apple ID, iTunes ID, Apple Store and others are available except for phone calls, cellular, FaceTime, iMessage and iCloud of your new Apple ID.)
iSalvor will start to bypass the Apple activation lock screen immediately. The whole bypass process only takes a few seconds.
Once it is done, a successfully bypassed window will display on your Mac or PC. That means the activation lock screen linked to the previous owner’s Apple ID is bypassed successfully. Click the “Done” button to finish the whole process. You can now enjoy using your iDevice with a new Apple ID!
Mode 2. Remove Screen Lock and Bypass Activation
With the “Remove Screen Lock and Bypass Activation” function in iSalvor, you can unlock your device when it’s locked by a screen lock, or when it’s in stolen mode or disabled mode. And you won’t be restricted by activation lock screen after screen lock removal. After the process, you can enter your iOS system and sign in with a new Apple ID. Here is how:
Video Tutorial: Remove Screen Lock and Bypass Activation Lock without Password
Step 1:Launch WooTechy iSalvor and Start
Launch WooTechy iSalvor. On the homepage of the software, select “Remove Screen Lock and Bypass Activation”.
Then click “Start” to remove screen lock.
Then connect your device to the computer. If you are asked to trust the computer on your phone, make sure to tap “Trust”. After that, put your device into recovery mode according to the on-screen instruction. Make sure you choose a correct device model on the top of the screen to see the correct instruction.
Confirm your device information. Make sure you select the correct FMI status of your device. If you are not sure about the FMI status, click “Don’t know the FMI status” to find out, or see more information about the FMI status. Finally, click “Next” to proceed.
Step 2:Jailbreak Your Device
Proceeding to the jailbreak Step, WooTechy iSalvor will automatically download a jailbreak package for you. After the download is complete, click “Start Jailbreak”.
To proceed, you need to agree to the term of jailbreak.
Then click “Next” to start jailbreaking your device.
Step 3:Start Bypassing
After jailbreaking, the process would be a bit different for devices running iOS 12 and devices running iOS 13 or above.
Option 1: For Devices Running iOS 12
Once the jailbreak is done, iSalvor will take a few seconds to process the data. After that, click to “Download” download a firmware for your device.
Now iSalvor will remove the screen lock on your device. After that, the device will reboot, and you need to click “Next” and follow the on-screen instruction to jailbreak your device once again. It’s the same process in the 2nd Step.
Finally, iSalvor will help you remove the screen lock and bypass activation lock. All you need to do is to make sure the device is connected and wait.
When the [Successfully Bypassed iCloud Activation!] screen appears, click “Done” to confirm. Now you can enter the iOS system, login with a new Apple ID and use most functions including phone call, cellular and iCloud sync and more.
Note for iDevices Running on iOS 12.x:
- DO NOT set the screen lock on your device after successfully removal. As the activation lock linked to the previous owner will reappear after reseting or restoring.
- Please use the mode of “iCloud Activation Lock Screen” to bypass the activation if the activation lock screen appears again.
- Remember to log in the iCloud account with a new Apple ID from App Store or iTunes Store, but not in Settings.
Option 2: For Devices Running iOS 13 or Above
Once the jailbreak is done, iSalvor will start turning the Find My [device] function off.
Then you need to verify your FMI status, and input “ON” or “OFF” before clicking “Confirm”.
Now iSalvor will go through a series of process to download and extract firmware package then remove Apple ID. Click “Download” to start, and make sure you don’t disconnect the device from computer during the entire process.
Now just wait till the bypass finishes and you can disconnect your device from computer and start using it as new.
Mode 3. Turn Off Find My [device]
With the “Turn Off FMI” function in iSalvor, you can turn off the Find My iPhone function and remove the Apple ID completely from your device without a password. After that, you can sign in with another Apple ID. Here is how:
Step 1: Launch WooTechy iSalvor and Start
Launch WooTechy iSalvor. On the homepage of the software, select “Trun Off FMI”.
And click “Start” to turn off Find My iPhone.
Then connect your device to the computer. If you are asked to trust the computer on your phone, make sure to tap “Trust”.
Step 2:Jailbreak Your Device
Then you need to jailbreak your device. Jailbreak for iPhone 6 to iPhone X can be done by following the in-app guide. Jailbreak for iPhone XR to iPhone 11 Pro Max can be done according to this Jailbreak Tutorial.
Step 3:Turn Off FMI
When the jailbreak is done, iSalvor will start turning off Find My iPhone. Make sure your device is connected to the computer and the internet connection is stable throughout the entire process.
After the process is finished, verify your FMI status according to the on-screen instruction, and select “ON” or “OFF” in the “Find My [Device] is” dropdown list. After that, click “Confirm”.
Now iSalvor will remove the Apple ID from your device to prevent the FMI function from turning back on again.
Finally, once the process is done, you can reset your device as shown on the screen and you can use it as a brand-new device.